If your Hotpoint dishwasher is showing an error code, it’s designed to alert you to common issues such as drainage problems, water intake faults, heating errors, or sensor-related issues. Understanding these codes can help you decide whether a simple reset may resolve the problem or if professional service is required.
Common Hotpoint Dishwasher Error Codes
F01 – Water leak detected
F01 indicates that water has been detected in the base of the dishwasher, triggering a safety stop.
What you can try: Turn off the dishwasher and allow it to dry for up to 24 hours.
When to call service: If the error returns, a leak should be inspected by a technician.
F02 – Water inlet fault
This error means the dishwasher is not filling with water as expected.
What you can try: Check that the water tap is fully open and household water pressure is normal.
When to call service: Persistent filling problems usually require professional attention.
F03 – Drainage error
F03 appears when the dishwasher is unable to drain water properly.
What you can try: Clean the filter and ensure the drain hose is not kinked or blocked.
When to call service: Ongoing drainage issues should be checked by a technician.
F04 – Heating fault
This code indicates the dishwasher is not heating water to the required temperature.
What you can try: Switch the dishwasher off at the power for several minutes, then restart.
When to call service: Heating system faults usually need professional repair.
F05 – Temperature sensor error
The dishwasher cannot accurately read the water temperature.
What you can try: Restart the dishwasher after a brief power reset.
When to call service: Sensor-related faults generally require service.
F06 – Water level error
This error indicates abnormal water levels during operation.
What you can try: Power reset the appliance and check for visible blockages.
When to call service: Repeated water level errors usually need professional inspection.
F07 – Heating circuit issue
F07 suggests a problem with the dishwasher’s heating circuit or control system.
What you can try: Restart the dishwasher after turning off power briefly.
When to call service: Ongoing errors typically require technician support.
How to Clear a Hotpoint Dishwasher Error Code
Many Hotpoint dishwasher error codes can be cleared by switching the dishwasher off at the power supply for several minutes and then restarting it. If the error returns, it usually indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the dishwasher stops mid-cycle, or you notice leaks, unusual noises, or poor cleaning performance.
Frequently Asked Questions
Can I keep using my Hotpoint dishwasher when an error code appears?
It’s best to stop using the dishwasher until the issue is resolved to avoid further damage.
Do Hotpoint dishwasher error codes reset automatically?
Some temporary errors may clear after a reset, but recurring codes usually require attention.
Are Hotpoint dishwasher error codes the same across all models?
Most Hotpoint dishwashers use similar codes, but exact meanings can vary by model.