If your Asko dishwasher displays an error code, it’s designed to indicate issues such as drainage problems, water intake faults, heating errors, or sensor-related issues. Understanding these codes can help you determine whether a simple reset may help or if professional service is required.
Common Asko Dishwasher Error Codes
F1 – Water heating fault
F1 indicates the dishwasher is not heating water to the required temperature during the cycle.
What you can try: Turn the dishwasher off at the power for several minutes, then restart it.
When to call service: If the error returns, the heating system may need inspection.
F2 – Water level too high
This code means the dishwasher has detected an overfill condition.
What you can try: Switch off the appliance and allow excess water to drain.
When to call service: Repeated overfilling usually requires professional attention.
F3 – Water intake error
F3 appears when the dishwasher is not filling with water as expected.
What you can try: Check that the water tap is fully open and household water pressure is normal.
When to call service: If the dishwasher still will not fill, service may be required.
F4 – Drainage fault
This error indicates the dishwasher is unable to drain water properly.
What you can try: Clean the filter and ensure the drain hose is not kinked or blocked.
When to call service: Persistent drainage problems should be checked by a technician.
F5 – Temperature sensor error
The dishwasher cannot accurately detect water temperature.
What you can try: Restart the dishwasher after a brief power reset.
When to call service: Sensor-related faults typically require professional repair.
F6 – Turbidity sensor fault
This code indicates a problem measuring water clarity during the wash cycle.
What you can try: Power reset the appliance.
When to call service: If the error continues, service inspection is recommended.
F7 – Water leakage detected
F7 means water has been detected in the base of the dishwasher.
What you can try: Turn off power and allow the dishwasher to dry for up to 24 hours.
When to call service: Repeated leak detection should be professionally inspected.
F8 – Spray arm or circulation issue
This error indicates a problem with water circulation inside the dishwasher.
What you can try: Check that spray arms can move freely and are not obstructed.
When to call service: Ongoing circulation issues may require service.
How to Clear an Asko Dishwasher Error Code
Many Asko dishwasher error codes can be cleared by switching the dishwasher off at the power supply for several minutes and then restarting it. If the code returns, it usually indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the dishwasher stops mid-cycle, or you notice leaks, unusual noises, or poor cleaning performance.
Frequently Asked Questions
Can I keep using my Asko dishwasher when an error code appears?
It’s best to stop using the dishwasher until the error is resolved to avoid further damage.
Do Asko dishwasher error codes reset automatically?
Some temporary errors may clear after a reset, but recurring codes usually require attention.
Are Asko dishwasher error codes the same across all models?
Most Asko dishwashers use similar codes, but exact meanings can vary slightly by model.