Indesit Washing Machine Error Codes (What They Mean + Fixes)

by

If your Indesit washing machine is displaying an error code, this guide explains what the code usually means, the most common causes, and safe checks you can try before calling service.

Note: Indesit error codes are commonly shown as F-codes (F01, F05, etc.). Meanings can vary slightly by model, but the explanations below apply to most modern Indesit washing machines.

Common Indesit Washing Machine Error Codes

F01 — Motor Control Error

What it usually means

  • A fault with the motor control circuit.

Try this

  1. Turn the machine off and unplug it.
  2. Leave it powered off for 5 minutes.
  3. Restart and run a short cycle.

Call service if

  • F01 returns immediately.

F02 — Motor Stalled

What it usually means

  • The motor is not turning correctly.

Try this

  1. Reduce load size and redistribute laundry.
  2. Ensure the drum turns freely by hand (off).
  3. Power off for 10 minutes and retry.

Call service if

  • The drum will not turn or F02 persists.

F03 — Temperature Sensor Error

What it usually means

  • A fault with the water temperature sensor.

Try this

  1. Power off at the wall for 5 minutes.
  2. Run a cold wash to test operation.

Call service if

  • F03 appears on multiple cycles.

F05 — Drain Error

What it usually means

  • The washer is unable to drain water.

Try this

  1. Clean the drain pump filter.
  2. Check the drain hose for kinks or blockages.
  3. Ensure the sink trap or standpipe is clear.

Call service if

  • The pump runs but water remains in the drum.

F06 — Door Lock Error

What it usually means

  • The door is not locking or being detected as closed.

Try this

  1. Re-close the door firmly.
  2. Remove laundry caught in the door seal.
  3. Power off for 2 minutes and retry.

Call service if

  • The door will not lock at all.

F08 — Heating Error

What it usually means

  • Water is not heating correctly.

Try this

  1. Avoid Eco mode temporarily and test a normal cycle.
  2. Reduce load size.
  3. Clean filters to improve water circulation.

Call service if

  • F08 persists across multiple cycles.

F10 — Water Level / Pressure Error

What it usually means

  • The washer cannot detect the correct water level.

Try this

  1. Check inlet hoses for kinks.
  2. Ensure the drain hose is not inserted too far into the standpipe.
  3. Restart after correcting detergent usage.

Call service if

  • F10 returns repeatedly.

F11 — Pump Circuit Error

What it usually means

  • A fault with the drain pump or its wiring.

Try this

  1. Power off for 5 minutes.
  2. Clean the pump filter and housing.
  3. Restart and test.

Call service if

  • F11 appears immediately after restart.

How to Clear an Indesit Washing Machine Error Code

  1. Turn the washing machine off.
  2. Turn off power at the wall for 5 minutes.
  3. Restore power and start a short test cycle.

If the error returns immediately, it usually indicates an active fault.

When to Call Service

  • Persistent motor or control errors
  • Repeated drain faults after cleaning
  • Heating errors that do not clear
  • Burning smells, tripped breakers, or visible leaks

FAQ

Are Indesit error codes the same on all models?

Most Indesit machines use F-codes, but exact behaviour can vary slightly by series.

Can detergent cause Indesit error codes?

Yes. Excess detergent can cause foam-related drain and water-level errors.

Is it safe to keep resetting the washer?

No. Repeated resets without fixing the cause can worsen the underlying issue.