Westinghouse Washing Machine Error Codes (What They Mean + Fixes)

by

If your Westinghouse washing machine is displaying an error code, this guide explains what the code usually means, the most common causes, and safe checks you can try before calling service.

Note: Error codes can vary slightly by model and year, but the explanations below apply to most modern Westinghouse front-load washing machines.

Common Westinghouse Washing Machine Error Codes

E10 — Water Inlet Error

What it usually means

  • The washer is not filling with water fast enough.

Try this

  1. Make sure the water tap is fully open.
  2. Check inlet hoses for kinks or twists.
  3. Clean the inlet hose filter screens.
  4. Confirm household water pressure is normal.

Call service if

  • The washer does not fill after basic checks.

E20 — Drain Error

What it usually means

  • Water is not draining within the expected time.

Try this

  1. Clean the drain pump filter.
  2. Check the drain hose for kinks or blockages.
  3. Ensure the sink trap or standpipe is clear.

Call service if

  • The pump runs but water remains in the drum.

E40 / E41 — Door Lock Error

What it usually means

  • The door is not closed or not locking correctly.

Try this

  1. Re-close the door firmly.
  2. Remove any laundry caught in the door seal.
  3. Power off for 2 minutes and retry.

Call service if

  • The door will not lock at all.

E60 — Heating Error

What it usually means

  • Water is not heating to the required temperature.

Try this

  1. Avoid Eco mode temporarily and test a normal cycle.
  2. Reduce load size and retry.
  3. Clean filters to improve water circulation.

Call service if

  • E60 appears on multiple cycles.

E90 — Control / Communication Error

What it usually means

  • A communication fault between electronic components.

Try this

  1. Turn off power at the wall for 5 minutes.
  2. Restart and run a short cycle.

Call service if

  • The error reappears (electronics diagnosis required).

EF0 — Excessive Foam Detected

What it usually means

  • Too much detergent or incorrect detergent type.

Try this

  1. Reduce detergent amount.
  2. Run a rinse cycle without detergent.
  3. Use only HE-rated detergent.

Call service if

  • The error continues with correct detergent use.

EF1 — Drain Pump Blocked

What it usually means

  • The drain pump or filter is obstructed.

Try this

  1. Clean the pump filter thoroughly.
  2. Remove lint, coins, or debris from the pump housing.
  3. Restart the washer.

Call service if

  • EF1 returns immediately after cleaning.

How to Clear a Westinghouse Washing Machine Error Code

  1. Turn the washing machine off.
  2. Turn off power at the wall for 5 minutes.
  3. Restore power and start a short test cycle.

If the error reappears immediately, it usually indicates an active fault.

When to Call Service

  • Repeated inlet or drain errors
  • Heating or control faults that persist
  • Door lock issues preventing operation
  • Burning smells, tripped breakers, or visible leaks

FAQ

Are Westinghouse and Electrolux error codes the same?

Some are similar, but always follow brand-specific guidance.

Can detergent cause Westinghouse error codes?

Yes. Excess detergent commonly causes foam-related drain and sensor errors.

Is it safe to keep resetting the washer?

No. Repeated resets without fixing the cause can worsen the underlying issue.