If your LG washing machine displays the IE error code, it means the washer is not filling with water properly. This error usually appears at the start of a wash cycle and prevents the machine from continuing.
In many cases, the issue is simple and can be fixed at home.
What Does LG Washing Machine Error Code IE Mean?
The IE error code indicates a water inlet problem. The washing machine is not detecting enough water entering the drum within the required time.
This may happen when:
- The washer does not begin filling
- The cycle pauses shortly after starting
- The drum remains mostly empty
Common Causes of LG IE Error Code
- Water supply tap is turned off or partially closed
- Kinked, twisted, or blocked inlet hose
- Clogged inlet filter inside the water valve
- Low household water pressure
- Faulty water inlet valve
How to Fix LG Washing Machine Error Code IE
Step 1: Check the Water Supply
Make sure both hot and cold water taps are fully open and supplying water normally.
Step 2: Inspect the Inlet Hoses
Turn off the water supply and check the hoses for kinks, bends, or visible damage. Straighten or replace hoses if needed.
Step 3: Clean the Inlet Filters
Disconnect the inlet hoses from the back of the washer. Remove and clean the small mesh filters using a soft brush and running water.
Step 4: Check Water Pressure
Test another tap in your home. Avoid running multiple water-heavy appliances at the same time if pressure is low.
Step 5: Restart the Washer
Plug the washer back in and start a new wash cycle to see if the error clears.
Can You Keep Using the Washer With an IE Error?
No. Running the washer without proper water supply can interrupt cycles, cause additional errors, and damage internal components over time.
How to Prevent LG IE Error Code in the Future
- Ensure water taps are always fully open
- Clean inlet filters every few months
- Avoid bending inlet hoses
- Maintain adequate household water pressure
When to Call a Technician
Call a professional if:
- Water supply and filters are confirmed clear
- The error persists after troubleshooting
- The washer does not fill at all
This may indicate a faulty inlet valve or control issue.
Summary
| Issue | Solution |
|---|---|
| IE error code | Water inlet problem |
| Closed tap | Fully open water supply |
| Blocked filter | Clean inlet filter |
| Low pressure | Improve water supply |
| Faulty valve | Professional repair |
More LG appliance error code guides
If you’re troubleshooting other LG appliances, these guides may also help: