If your Haier washing machine displays an error code, it’s designed to alert you to common issues such as water supply problems, drainage faults, door lock errors, motor issues, or sensor-related problems. Understanding these codes can help you decide whether a simple reset may resolve the issue or if professional service is required.
Common Haier Washing Machine Error Codes
E1 – Drain error
The E1 error indicates the washing machine is unable to drain water properly.
What you can try: Check the drain hose for kinks and ensure there are no visible blockages.
When to call service: Persistent drainage issues usually require professional service.
E2 – Door lock error
This code means the washing machine door is not properly closed or locked.
What you can try: Close the door firmly and check for obstructions.
When to call service: If the door will not lock, service may be required.
E3 – Unbalanced load detected
E3 appears when the load inside the drum is uneven.
What you can try: Redistribute the laundry and restart the cycle.
When to call service: Service is not required unless the error persists with balanced loads.
E4 – Water inlet error
This error indicates the washing machine is not filling with water as expected.
What you can try: Ensure water taps are fully open and household water pressure is normal.
When to call service: Ongoing filling issues usually require inspection.
E5 – Heating error
The washing machine is not heating water correctly.
What you can try: Restart the appliance after switching off power briefly.
When to call service: Heating system faults typically need professional repair.
E6 – Motor error
E6 suggests a problem with the motor or drive system.
What you can try: Turn off the washing machine and allow it to rest before restarting.
When to call service: Motor-related faults usually require technician support.
E7 – Temperature sensor fault
The washing machine cannot accurately read water temperature.
What you can try: Power reset the appliance.
When to call service: Sensor faults typically require professional service.
CL – Child lock activated
This is not a fault but indicates the child lock feature is turned on.
What you can try: Disable child lock using your model’s instructions.
When to call service: Service is not required for this code.
How to Clear a Haier Washing Machine Error Code
Many Haier washing machine error codes can be cleared by switching the machine off at the power supply for several minutes and then restarting it. If the code returns, it usually indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the washing machine stops mid-cycle, or you notice leaks, unusual noises, or poor washing results.
Frequently Asked Questions
Can I keep using my Haier washing machine with an error code?
It’s best to stop using the washing machine until the issue is resolved to avoid further damage.
Do Haier washing machine error codes reset automatically?
Some temporary issues may clear after a reset, but recurring codes usually need attention.
Are Haier washing machine error codes the same across all models?
Most Haier washing machines use similar codes, but exact meanings can vary by model.