If your Zanussi dishwasher is showing an error code, it’s designed to alert you to common problems such as drainage issues, water supply faults, heating errors, or sensor-related issues. Understanding these codes can help you decide whether a simple reset may resolve the problem or if professional service is required.
Common Zanussi Dishwasher Error Codes
i10 – Water intake problem
The i10 error indicates the dishwasher is not filling with water as expected.
What you can try: Ensure the water tap is fully open and household water pressure is normal.
When to call service: If the error persists, professional inspection may be required.
i20 – Drainage error
This code means the dishwasher is unable to drain water properly.
What you can try: Clean the filter and check the drain hose for kinks or blockages.
When to call service: Ongoing drainage issues usually require service.
i30 – Leak detected
i30 appears when water is detected in the base of the dishwasher.
What you can try: Switch off the appliance and allow it to dry for up to 24 hours.
When to call service: If the error returns, a leak should be inspected by a technician.
i40 – Pressure sensor error
This error indicates a problem detecting the correct water level.
What you can try: Restart the dishwasher after turning off power briefly.
When to call service: Sensor-related faults usually require professional repair.
i50 – Wash motor error
The dishwasher has detected a fault with the circulation motor.
What you can try: Power reset the dishwasher.
When to call service: Motor-related errors typically require technician support.
i60 – Heating error
This code indicates the dishwasher is not heating water correctly.
What you can try: Restart the appliance after switching off power briefly.
When to call service: Heating system faults usually need professional repair.
i70 – Temperature sensor fault
The dishwasher cannot accurately read water temperature.
What you can try: Power reset the appliance.
When to call service: Sensor-related faults generally require service.
i80 – Control board communication error
This error suggests a communication problem within the dishwasher’s control system.
What you can try: Turn off the dishwasher at the power for several minutes, then restart.
When to call service: Persistent control errors usually require professional attention.
How to Clear a Zanussi Dishwasher Error Code
Many Zanussi dishwasher error codes can be cleared by switching the dishwasher off at the power supply for several minutes and then restarting it. If the code returns, it usually indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the dishwasher stops mid-cycle, or you notice leaks, unusual noises, or poor cleaning results.
Frequently Asked Questions
Can I keep using my Zanussi dishwasher with an error code?
It’s best to stop using the dishwasher until the issue is resolved to avoid further damage.
Do Zanussi dishwasher error codes reset automatically?
Some temporary issues may clear after a reset, but recurring codes usually need attention.
Are Zanussi dishwasher error codes the same across all models?
Most Zanussi dishwashers use similar codes, but exact meanings can vary by model.