If your AEG washing machine displays an error code, it’s designed to alert you to issues such as drainage problems, water supply faults, door lock errors, heating issues, or sensor-related problems. Understanding these codes can help you decide whether a simple reset may resolve the issue or if professional service is required.
Common AEG Washing Machine Error Codes
E10 – Water inlet problem
The E10 error indicates the washing machine is not filling with water as expected.
What you can try: Ensure the water taps are fully open and household water pressure is normal.
When to call service: If the error persists, professional inspection may be needed.
E20 – Drain error
This code means the washing machine is unable to drain water properly.
What you can try: Check that the drain hose is not kinked and clear any visible blockages.
When to call service: Ongoing drainage problems usually require service.
E40 – Door lock error
E40 appears when the washing machine detects that the door is not properly closed or locked.
What you can try: Check for obstructions and close the door firmly.
When to call service: If the door will not lock, service may be required.
E60 – Heating system error
This error indicates a problem with the water heating system.
What you can try: Restart the washing machine after switching off power briefly.
When to call service: Heating system issues typically need professional repair.
E70 – Temperature sensor fault
The washing machine cannot accurately read water temperature.
What you can try: Power reset the appliance.
When to call service: Sensor-related faults usually require technician support.
E90 – Communication error
E90 suggests a communication issue between internal control components.
What you can try: Turn the washing machine off at the power for several minutes, then restart.
When to call service: If the error returns, professional service is recommended.
EF0 – Detergent or overfoaming issue
This code appears when excessive foam or a detergent-related issue is detected.
What you can try: Reduce detergent use and run a rinse cycle.
When to call service: If foaming issues continue, service may be required.
CL – Child lock activated
This is not a fault but indicates the child lock feature is turned on.
What you can try: Disable child lock using your model’s instructions.
When to call service: Service is not required for this code.
How to Clear an AEG Washing Machine Error Code
Many AEG washing machine error codes can be cleared by switching the machine off at the power supply for several minutes and then restarting it. If the code returns, it usually indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the washing machine stops mid-cycle, or you notice leaks, unusual noises, or poor washing results.
Frequently Asked Questions
Can I keep using my AEG washing machine with an error code?
It’s best to stop using the washing machine until the issue is resolved to avoid further damage.
Do AEG washing machine error codes reset automatically?
Some temporary issues may clear after a reset, but recurring codes usually need attention.
Are AEG washing machine error codes the same across all models?
Most AEG washing machines use similar codes, but exact meanings can vary by model.