If your Frigidaire dishwasher is displaying an error code, it’s designed to alert you to common problems such as drainage issues, water supply faults, heating errors, or control and sensor problems. Understanding these codes can help you decide whether a simple reset may resolve the issue or if professional service is required.
Common Frigidaire Dishwasher Error Codes
ER – General error
This code indicates the dishwasher has detected a general operational fault.
What you can try: Turn the dishwasher off at the power for several minutes, then restart.
When to call service: If the error returns, professional inspection is recommended.
ER UF – Ventilation or airflow issue
ER UF appears when the dishwasher detects a problem with air circulation during drying.
What you can try: Restart the dishwasher and ensure nothing is blocking vents.
When to call service: Persistent airflow errors usually require service.
ER WT – Water heating error
This code means the dishwasher is not heating water to the required temperature.
What you can try: Power reset the dishwasher.
When to call service: Heating system faults typically need professional repair.
ER DR – Drain error
The dishwasher is unable to drain water properly at the end of the cycle.
What you can try: Clean the filter and check the drain hose for kinks or blockages.
When to call service: Ongoing drainage problems require technician support.
ER FL – Water fill error
This error indicates the dishwasher is not filling with water as expected.
What you can try: Ensure the water tap is fully open and household water pressure is normal.
When to call service: If filling issues continue, service is recommended.
ER LE – Leak detected
ER LE means water has been detected in the base of the dishwasher.
What you can try: Switch off power and allow the dishwasher to dry for up to 24 hours.
When to call service: Repeated leak detection should be professionally inspected.
ER CE – Communication error
This code suggests a communication issue between internal control components.
What you can try: Restart the dishwasher after a brief power reset.
When to call service: Control board issues usually require service.
CL – Control lock activated
This is not a fault but indicates the control lock feature is turned on.
What you can try: Disable the control lock using your model’s instructions.
When to call service: Service is not required for this code.
How to Clear a Frigidaire Dishwasher Error Code
Many Frigidaire dishwasher error codes can be cleared by switching the dishwasher off at the power supply for several minutes and then restarting it. If the code returns, it usually indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the dishwasher stops mid-cycle, or you notice leaks, unusual noises, or poor cleaning performance.
Frequently Asked Questions
Can I keep using my Frigidaire dishwasher with an error code?
It’s best to stop using the dishwasher until the issue is resolved to avoid further damage.
Do Frigidaire dishwasher error codes reset automatically?
Some temporary issues may clear after a reset, but recurring codes usually need attention.
Are Frigidaire dishwasher error codes the same across all models?
Most Frigidaire dishwashers use similar codes, but exact meanings can vary by model.