If your Indesit dishwasher shows an error code, it’s designed to alert you to common problems such as drainage issues, water intake faults, heating errors, or sensor problems. Understanding these codes can help you decide whether a simple reset may help or if professional service is needed.
Common Indesit Dishwasher Error Codes
AL01 – Water leak detected
This error means the dishwasher has detected water in the base, triggering a safety stop.
What you can try: Turn off the dishwasher and allow it to dry for up to 24 hours.
When to call service: If the error returns, a leak should be inspected by a technician.
AL02 – Water inlet fault
AL02 indicates the dishwasher is not filling with water as expected.
What you can try: Check that the water tap is fully open and household water pressure is adequate.
When to call service: Persistent filling issues may require professional attention.
AL03 – Drainage error
This code appears when the dishwasher is unable to drain water correctly.
What you can try: Clean the filter and ensure the drain hose is not kinked or blocked.
When to call service: Ongoing drainage problems usually require service.
AL04 – Temperature sensor error
The dishwasher cannot accurately read the water temperature.
What you can try: Restart the appliance after a brief power reset.
When to call service: Sensor-related faults generally need professional repair.
AL05 – Heating fault
This error indicates the dishwasher is not heating the water properly during the wash cycle.
What you can try: Switch the dishwasher off at the power for several minutes, then restart.
When to call service: Heating system issues usually require a technician.
AL06 – Water level error
AL06 means the dishwasher has detected abnormal water levels.
What you can try: Power reset the dishwasher and check for visible blockages.
When to call service: Repeated water level errors should be professionally inspected.
AL08 – Heating element or control fault
This code suggests a problem controlling or monitoring water heating.
What you can try: Restart the dishwasher after turning off power briefly.
When to call service: Ongoing errors usually need professional repair.
How to Clear an Indesit Dishwasher Error Code
Many Indesit dishwasher error codes can be cleared by switching the dishwasher off at the power supply for several minutes and then restarting it. If the error returns, it typically indicates an underlying issue.
When to Call Service
You should contact a qualified technician if an error code keeps reappearing, the dishwasher stops mid-cycle, or you notice leaks, unusual noises, or poor cleaning results.
Frequently Asked Questions
Can I keep using my Indesit dishwasher with an error code?
It’s best to stop using the dishwasher until the error is resolved to prevent further damage.
Do Indesit dishwasher error codes reset automatically?
Some temporary issues may clear after a reset, but recurring codes usually need attention.
Are Indesit dishwasher error codes the same across all models?
Most Indesit dishwashers use similar codes, but exact meanings can vary slightly by model.