Zanussi Washing Machine Error Codes (What They Mean + Fixes)

by

If your Zanussi washing machine is displaying an error code, it means the washer has detected a condition that may interrupt normal operation. This guide covers the most common Zanussi washing machine error codes, what they usually mean, and safe checks you can try before calling service.

Common Zanussi Washing Machine Error Codes

E10 — Water Inlet Error

What it usually means

  • The washer is not filling with enough water.

Try this

  1. Ensure water taps are fully open.
  2. Check inlet hoses for kinks.
  3. Clean inlet filters if accessible.

Call service if

  • No water enters the drum.

E11 — Slow Fill / Low Water Pressure

What it usually means

  • Water is entering the washer too slowly.

Try this

  1. Check household water pressure.
  2. Ensure inlet hoses are not restricted.

Call service if

  • The error appears repeatedly.

E20 — Drain Error

What it usually means

  • The washer cannot drain water within the expected time.

Try this

  1. Clean the drain pump filter.
  2. Check the drain hose for kinks or blockages.

Call service if

  • Water remains in the drum after cleaning.

E21 — Drain Pump Problem

What it usually means

  • The drain pump is not operating correctly.

Try this

  1. Power off for 5 minutes.
  2. Restart and try a drain/spin cycle.

Call service if

  • The washer will not drain at all.

E23 — Drain Control Circuit Error

What it usually means

  • A fault has been detected in the drain control electronics.

Try this

  1. Turn off power for 5 minutes.
  2. Restart the washer.

Call service if

  • The error returns immediately.

E24 — Drain Pump Triac Error

What it usually means

  • An electronic fault affecting the drain pump has been detected.

Try this

  1. Restart after powering off.

Call service if

  • The washer cannot complete a drain cycle.

E30 — Door Lock Error

What it usually means

  • The door is not locking or unlocking correctly.

Try this

  1. Close the door firmly.
  2. Remove items caught in the door seal.

Call service if

  • The door will not lock at all.

E31 — Pressure Sensor Error

What it usually means

  • The washer cannot correctly detect water level.

Try this

  1. Restart the washer.
  2. Avoid using excess detergent.

Call service if

  • The error repeats across cycles.

E35 — Overfill Error

What it usually means

  • The washer has detected too much water.

Try this

  1. Turn off the washer immediately.
  2. Check for visible leaks.

Call service if

  • The washer continues filling.

E40 / E41 — Door Not Closed

What it usually means

  • The door is not detected as closed.

Try this

  1. Close the door firmly.
  2. Restart the cycle.

Call service if

  • The washer will not start.

E50 — Motor or Inverter Error

What it usually means

  • A motor or motor control fault has been detected.

Try this

  1. Reduce load size.
  2. Restart after powering off.

Call service if

  • The drum does not rotate.

E60 / E61 — Heating Error

What it usually means

  • The washer is not heating water correctly.

Try this

  1. Restart and run a normal wash.
  2. Check household hot water supply.

Call service if

  • The error persists on multiple cycles.

How to Clear a Zanussi Washing Machine Error Code

  1. Turn the washing machine off.
  2. Switch off power at the wall for 5 minutes.
  3. Restore power and start a short test cycle.

If the error returns immediately, it usually indicates an active fault.

When to Call Service

  • Repeated drain or fill errors after cleaning
  • Overfill or leak warnings
  • Motor or heating faults
  • The washer failing to start or complete cycles

FAQ

Can detergent cause Zanussi washing machine error codes?

Yes. Excess detergent can cause foam-related drain and water level errors.

Do Zanussi error codes vary by model?

Yes. Codes can vary slightly by model and year, but the causes above apply to most Zanussi washing machines.

Is it safe to keep resetting the washer?

Occasional resets are fine, but repeated resets without fixing the underlying cause are not recommended.